Propuesta de mejoramiento del proceso productivo en planta industrial de película stretch polivinil cloruro en Cartagena-Colombia aplicando Value Stream Mapping

José Morelos-Gómez; Eladio Enrique Peralta-Ubarnes

doi:10.15649/2346030X.822

Authors

José Morelos-Gómez Universidad de Cartagena https://orcid.org/0000-0002-0334-0575
Eladio Enrique Peralta-Ubarnes Universidad de Cartagena

DOI:

https://doi.org/10.15649/2346030X.822

Keywords:

value stream mapping, lean manufacturing, process improvement, operational efficiency, continuous flow, value chain

Abstract

This article presents the evaluation and proposal for improvement in the productive process in the plant of film polyvinyl chloride (PVC stretch) of a manufacturing company in the Mamonal industrial sector in Cartagena, Colombia. The methodology applied was Value Stream Mapping (VSM), for the identification of families of production, characterization of the present state of the flow of materials and information and definition of a future state map. As a result, developed proposal for improvement of the film plant strech getting a decrease of 42% in the delivery time required for orders of the family of roll production for industrial use. With this improvement concludes that, with simple targeted actions, it is possible to achieve significant progress in the improvement of production processes of this type of manufacturing companies, being evident the impact generated by the establishment of a continuous flow and level in the chain of value creation.

References

D. Torres-Reina, “Globalización, empresas multinacionales e historia”. Pensamiento y gestión, Vol. 1, no. 30, p. 165-185, 2011.

ANDI, “Balance 2015 y perspectiva”, Asociación Nacional de Industriales, 2016.

L. Garay-Salamanca, “Colombia: Estructura industrial e internacionalización 1967-1996”. Bogotá D. C.: Cargraphics S. A., 1998.

J. Morelos, I. S. Gómez y R. J. De Ávila, “Capacidades de innovación de las pequeñas y medianas empresas del sector metalmecánico en Cartagena, Colombia”. Entramado, Vol. 17, no. 1, p. 12–29, 2021.

ANDI, “Balance 2016 y perspectiva”, Asociación Nacional de Industriales, 2017.

T. Ohno, “El Sistema de Producción Toyota Más allá de la producción a gran escala”. Nueva York: Routledge, 1991.

J. K. Liker, “The Toyota Way: 14 Management Principles from the World's Greatest Manufacturer Madison”: CWL Publishing Enterprises, Inc., 2004.

J. P. Womack, Jones, and D. T. Roos, “La máquina que cambió el mundo”. Barcelona: Profit Editorial, 2017.

J. C. Hernández, and A. Vizán, “Lean Manufacturing: Conceptos, técnicas e implantación”. Madrid: Escuela de Organización Industrial - EOI., 2013.

M. Rajadell, and J. L. Sánchez, “Lean Manufacturing. La evidencia de una necesidad”. Madrid: Ediciones Díaz de Santos., 2010.

A. S. Tejeda, “Mejoras de Lean Manufacturing en los sistemas productivos”. Ciencia y sociedad, Vol. 36, no. 2, p. 276-310, 2011.

J. P. Womack, and D. T. Jones, “Lean Thinking”. Editorial Planeta, 2012.

M. Carreras, “Lean Manufacturing”. La evidencia de una necesidad”. Ediciones Díaz de Santos, 2010.

P. Nieto, “Lean Manufacturing”: Revisión histórica, 2019.

L. Socconini, “Lean manufacturing. Paso a paso”. Marge books, 2019.

M. Poppendieck, “Principles of Lean Thinking”. Eden Prairie, 2002.

G. Hodge, K. Goforth, J. Joines, and K. Thoney, “Adapting lean manufacturing principles to the textile industry”. Production Planning and Control, Vol. 22, no. 3, p. 237-247, 2011.

A. Morales, J. A. Rojas, L. H. Hernández, A. Morales, y M. Y. Jiménez, “Modelo de un sistema de producción esbelto con redes de Petri para apoyar la toma de decisiones”. Ingeniare. Revista Chilena de Ingeniería, Vol. 23, no. 2, p.182-195, 2015.

H. H. González, N. Marulanda y F. J. Echeverry, “Diagnosis in the implementation of Lean manufacturing tools based on the operation strategy in some companies from the textile sector in Colombia: a case report”. Revista EAN, Vol. 1, no. 85, p. 199-218, 2018.

E. W. Dickson, S. Singh, D. S. Cheung, C. C. Wyatt, and A. S. Nugent, “Application of lean manufacturing techniques in the emergency department”. The Journal of Emergency Medicine, Vol. 37, no. 2, p. 177-182, 2009.

T. Ohno, “Toyota production system: beyond large-scale production”. crc Press, 1998.

Japan Management Association. “KANBAN: Just-in-time en Toyota”. Routledge, 2018.

Y. Monden, “Toyota production system: an integrated approach to just-in-time”. Productivity Press, 2011.

J. B. Naylor, M. M. Naim, and D. Berry, “Leagility: Integrating the lean and agile manufacturing paradigms in the total supply chain”. International Journal of Production Economics, Vol. 62, no. 1, p. 107-118, 1999.

C. Carro, y D. A. González, “Administración de la calidad total”, 2012.

A. Brintrup, D. Ranasinghe, and D. McFarlane, “RFID opportunity analysis for leaner manufacturing”. International Journal of Production Research, Vol. 48, no. 9, p. 2745-2764, 2010.

M. Rother, J. Shook, y Lean Enterprise Institute. “Observar para crear valor: Cartografía de la cadena de valor para agregar valor y eliminar muda”. Brooklin: Lean Enterprise Institute, 1999.

T. Rohac, and M. Januska, “Value Stream Mapping Demonstration on Real Case Study”. Procedia Engineering, Vol. 1, no. 100, p. 520-529, 2015.

S. J. Pavnaskar, J. K. Gershenson, and A. B. Jambekar, “Classification scheme for lean manufacturing tools”. International Journal of Production Research, Vol. 41, no. 13, p. 3075-3090, 2003.

C. Junjie, “The Research of Overproduction Mechanism from the Perspective of Industrial Policies: Empirical Evidence from Manufacturing Industry”. Journal of Finance & Economics, Vol 1, no 5, p. 1-7, 2016.

W. G. Sullivan, T. N. McDonald, and V. M. Van Aken, “Equipment replacement decisions and lean manufacturing”. Robotics and Computer-Integrated Manufacturing, Vol. 18, no. 3, p. 255-265, 2002.

U. Guin, Z. Zhou, and A. Singh, “Robust design-for-security architecture for enabling trust in ic manufacturing and test”. Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 26, no. 5, p. 818-830, 2018.

M. Braglia, G. Carmignani, and F. Zammori, “A new value stream mapping approach for complex production systems”. International journal of production research, Vol. 44, no. 18, p. 3929-3952, 2006.

J. Morelos, T. F. Herrera and E. D. H. Granadillo, “Behaviour of Productivity Indicators and Financial resources in the field of extraction and exploitation of minerals in Colombia”. International Journal of Productivity and Quality Management, Vol. 25, no. 3, p. 349-367, 2018.

L. Serrano, y N. R. Ortiz, “Una revisión de los modelos de mejoramiento de procesos con enfoque en el rediseño. Estudios Gerenciales, Vol. 28, no.125, p. 13-22, 2012.

R. Kaplinsky, and M. Morris, “A handbook for value chain research”. Brighton: University of Sussex, Institute of Development Studies, 2000.

C. Grewal, “An initiative to implement lean manufacturing using value stream mapping in a small company”. International Journal of Manufacturing Technology and Management, Vol. 15, no. 3, p. 404-417, 2008.

J. Bhamu, J. V. Shailendra-Kumar, and K. S. Sangwan, “Productivity and quality improvement through value stream mapping: a case study of Indian automotive industry”. International Journal of Productivity and Quality Management, Vol. 10, no. 3, p. 288-306, 2012.

P. Kuhlang, S. Hempen, W. Sihn, and J. Deuse, “Systematic improvement of value streams–fundamentals of value stream oriented process management”. International Journal of Productivity and Quality Management, Vol. 12, no. 1, p. 1-17, 2013.

W. W. Fisher, S. Barman, and P. L. Killingsworth, Value stream mapping for improving academic advising. International Journal of Information and Operations Management Education, Vol. 4, no. 1, p. 45-59, 2011.

P. Hines, and N. Rich, “The Seven Value Stream Mapping Tools”. International Journal of Operations & Production Management, Vol. 1, no. 17, p. 46-64, 1997.

J. A. Garza, J. T. Romero, K. Govindan, A. Cherrafi, and U. Ramanathan, “A PDCA-based approach to environmental value stream mapping (E-VSM)”. Journal of Cleaner Production, Vol.180, no. 1, p. 335-348, 2018.

D. Antonelli, and D. Stadnicka, “Combining factory simulation with value stream mapping: a critical discussion”. Procedia CIRP, Vol. 67, no. 1, p. 30-35, 2018.

A. Lugert, A. Batz, and H. Winkler, “Empirical assessment of the future adequacy of value stream mapping in manufacturing industries”. Journal of Manufacturing Technology Management, Vol. 29, no. 5, p. 886-906, 2018.

J. Singh, H. Singh, D. Singh, and K. Singh, “Evaluating lean thinking using value stream mapping in manufacturing industry-a case study”. International Journal of Productivity and Quality Management, Vol. 22, no.1, p. 101-116, 2017.

M. P. Sarria, G. A. Fonseca, and C. C. Bocanegra, “Modelo metodológico de implementación de Lean Manufacturing”. Revista Escuela de Administración de Negocios, Vol. 1, no. 83, p. 51-71, 2017.

F. González, “Manufactura esbelta, principales herramientas”. Revista Panorama Administrativo, Vol. 1, no. 1, p. 85-112, 2007.

C. Veres, L. Marian, S. Moica, and K. Al-Akel, “Case study concerning 5S method impact in an automotive company”. Procedia Manufacturing, Vol. 22, no. 1, p. 900-905, 2018.

F. C. Filip, and V. Marascu-Klein, “The 5S lean method as a tool of industrial management performances”. Materials Science and Engineering, Vol. 95, no. 1, p. 12-127, 2015.

M. A. Almomani, M. Aladeemy, A. Abdelhadi, and A. Mumani, “A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques”. Computers and Industrial Engineering, Vol. 66, no. 2, p. 461-469, 2013.

S. Shingo, “A revolution in manufacturing: the SMED system”. Routledge, 2019.

J. Matzka, M. Di Mascolo, and K. Furmans, “Buffer sizing of a Heijunka Kanban system”. Journal of Intelligent Manufacturing, Vol. 23, no. 1, p. 49-60, 2012.

P. Korytkowski, T. Wisniewski, and S. Rymaszewski, “Multivariate simulation analysis of production leveling (heijunka)-a case study”. IFAC Proceedings Volumes, Vol. 46, no. 9, p. 1554-1559, 2013.

M. Tekin, M. Arslandere, M. Etlioğlu, O. Koyuncuoğlu, and E. Tekin, “An Application of SMED and Jidoka in Lean Production”. In The International Symposium for Production Research, Vol. 1, no. 1, pp. 530-545), 2018.

E. Turanoglu, M. Cakmakci, and C. Kahraman, “Fuzzy Copras method for performance measurement in total productive maintenance: a comparative analysis”. Journal of Business Economics and Management, Vol. 17, no. 5, p. 663-684, 2016.

M. Ahmad, D. Dennehy, K. Conboy, and M. Oivo, “Kanban in software engineering: A systematic mapping study”. Journal of Systems and Software, Vol. 137, no. 1, p. 96-113, 2018.

D. Mitra, and I. Mitrani, “Analysis of a kanban discipline for cell coordination in production lines, II: Stochastic demands”. Operations research, Vol. 39, no. 5, p. 807-823, 1991.

B. Singh, S. K. Garg and S. K. Sharma, “Value stream mapping: literature review and implications for Indian industry”. The International Journal of Advanced Manufacturing Technology, Vol. 53, no.5, p. 799-809, 2011.

J. Dal Forno, F. A. Pereira, F. A. Forcellini, and L. M. Kipper, “Value Stream Mapping: a study about the problems and challenges found in the literature from the past 15 years about application of Lean tools”. The International Journal of Advanced Manufacturing Technology, Vol. 72, no. 5, p. 779-790, 2014.

E. J. Lourenço, A. J. Baptista, J. P. Pereira, and C. Dias, “Multi-layer stream mapping as a combined approach for industrial processes eco-efficiency assessment”. In Re-engineering Manufacturing for Sustainability, Vol. 1, no. 1, p. 427-433, 2013.

R. Sindhwani, P. L. Singh, R. Chopra, K. Sharma, A. Basu, D. K. Prajapati, and V. Malhotra, “Agility Evaluation in the Rolling Industry: A Case Study”. In Advances in Industrial and Production Engineering, Vol. 1, no. 1, p. 753-770, 2019.

Y. H. Lian and H. P. Van-Landeghem, “Analysing the effects of Lean manufacturing using a value stream mapping-based simulation generator”. International Journal of Production Research, Vol. 45, no. 13, p. 3037-3058, 2007.

K. Barcia, and C. De Loor, “Metodología para mejorar un proceso de ensamble aplicando el Mapeo de la Cadena de Valor (VSM)”. Revista Tecnológica Espol, Vol. 20, no. 1, p. 31-38, 2007.

M. Rother, and J. Shook, “Learning to See: Value Stream Mapping to Add Value and Eliminate Muda”. The Lean Enterprise Institute. Inc., Brookline, MA, 1999.