Implementación TPM para incrementar el OEE en el sector manufactura: revisión sistemática de literatura
DOI:
https://doi.org/10.15649/2346030X.4097Palabras clave:
TPM, OEE, manufactura esbelta, kaizenResumen
El presente artículo de revisión sistemática tiene como objetivo proporcionar un análisis bibliométrico de la investigación sobre TPM y OEE en el sector manufacturo, este sector es el principal motor de crecimiento económico, generando nuevos puestos de trabajo, innovaciones e incentivando el desarrollo en el Perú. El análisis de esta investigación se llevó a cabo a través de una revisión bibliográfica sistemática, en la cual se seleccionaron un conjunto de artículos relacionados con “TPM” y “OEE”, siguiendo criterios específicos para extraer información precisa y confiable. por conveniencia con el fin de extraer información acertada y confiable. Los criterios de inclusión consistieron en seleccionar solo artículos de investigación y revisión de Scopus relevante a “TPM” y “OEE” en el sector manufacturero durante el periodo 2013 – 2023, escritos en inglés y con acceso completo y gratuito. Tras la iteración realizada, la muestra final incluyo 26 artículos de revisas, concluyendo que existen pruebas empíricas suficientes para establecer una relación positiva entre la implementación TPM para aumentar el OEE en el sector manufactura.
Referencias
[1] P. Ondra, “The Impact of Single Minute Exchange of Die and Total Productive Maintenance on Overall Equipment Effectiveness,” Journal of Competitiveness, vol. 14, no. 3, pp. 113–132, 2022, doi: 10.7441/joc.2022.03.07.
[2] P. Dobra and J. Jósvai, “Assembly Line Overall Equipment Effectiveness (OEE) Prediction from Human Estimation to Supervised Machine Learning,” Journal of Manufacturing and Materials Processing, vol. 6, no. 3, 2022, doi: 10.3390/jmmp6030059.
[3] P. J. Balcázar Hidalgo, Z. B. Chávez Romero, and K. F. Torres Mirez, “Mantenimiento productivo total en el sector manufacturero. Una revisión sistemática de literatura,” LACCEI (Latin American and Caribbean Consortium of Engineering Institutions), Dec. 2023. doi: 10.18687/leird2023.1.1.487.
[4] L. Espiritu, R. Paolo, L. Palomino, E. Gerardo, L. Chávarri, and C. Carolina, “UNIVERSIDAD PERUANA DE CIENCIAS APLICADAS ASESOR(ES).”
[5] F. A. Abdulmalek and J. Rajgopal, “Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study,” Int J Prod Econ, vol. 107, no. 1, pp. 223–236, May 2007, doi: 10.1016/J.IJPE.2006.09.009.
[6] L. F. Pocorey Choque and M. Ayabe, “v13n19_a09”.
[7] J. P. Womack, D. T. Jones, and D. Roos, “La máquina que cambió el mundo : el libro que descubrió el lean management, arma secreta de Toyota que revolucionó la industria del automóvil, y que mejor sigue explicando en qué consiste,” 2017, Accessed: Jul. 23, 2025. [Online]. Available: http://www.marcialpons.es/libros/la-maquina-que-cambio-el-mundo/9788416583973/.
[8] S. Sahoo and S. Yadav, “Influences of TPM and TQM Practices on Performance of Engineering Product and Component Manufacturers,” Procedia Manuf, vol. 43, pp. 728–735, Jan. 2020, doi: 10.1016/J.PROMFG.2020.02.111.
[9] I. P. S. Ahuja and J. S. Khamba, “Total productive maintenance: Literature review and directions,” International Journal of Quality and Reliability Management, vol. 25, no. 7, pp. 709–756, 2008, doi: 10.1108/02656710810890890.
[10] M. gorzata Jasiulewicz-Kaczmarek and M. Piechowski, “Practical Aspects of OEE in Automotive Company – Case Study,” pp. 213–218, Aug. 2016, doi: 10.2991/MSMI-16.2016.51.
[11] R. Domingo and S. Aguado, “Overall environmental equipment effectiveness as a metric of a lean and green manufacturing system,” Sustainability (Switzerland), vol. 7, no. 7, pp. 9031–9047, 2015, doi: 10.3390/su7079031.
[12] K. G. Eswaramurthi and P. V. Mohanram, “Improvement of manufacturing performance measurement system and evaluation of overall resource effectiveness,” Am J Appl Sci, vol. 10, no. 2, pp. 131–138, 2013, doi: 10.3844/ajassp.2013.131.138.
[13] D. Maletič, M. Maletič, and B. Gomišček, “The impact of quality management orientation on maintenance performance,” Int J Prod Res, vol. 52, no. 6, pp. 1744–1754, 2014, doi: 10.1080/00207543.2013.848480.
[14] A. Azizi, “Evaluation Improvement of Production Productivity Performance using Statistical Process Control, Overall Equipment Efficiency, and Autonomous Maintenance,” Procedia Manuf, vol. 2, pp. 186–190, 2015, doi: 10.1016/j.promfg.2015.07.032.
[15] X. Jin, B. A. Weiss, D. Siegel, and J. Lee, “Present status and future growth of advanced maintenance technology and strategy in us manufacturing,” Int J Progn Health Manag, vol. 7, no. 3, 2016, doi: 10.36001/ijphm.2016.v7i3.2409.
[16] J. M. Simões, C. F. Gomes, and M. M. Yasin, “Changing role of maintenance in business organisations: Measurement versus strategic orientation,” Int J Prod Res, vol. 54, no. 11, pp. 3329–3346, 2016, doi: 10.1080/00207543.2015.1106611.
[17] P. Guariente, I. Antoniolli, L. P. Ferreira, T. Pereira, and F. J. G. Silva, “Implementing autonomous maintenance in an automotive components manufacturer,” Procedia Manuf, vol. 13, pp. 1128–1134, 2017, doi: 10.1016/j.promfg.2017.09.174.
[18] S. Nallusamy, V. Kumar, V. Yadav, U. K. Prasad, and S. K. Suman, “Implementation of total productive maintenance to enhance the overall equipment effectiveness in medium scale industries,” International Journal of Mechanical and Production Engineering Research and Development, vol. 8, no. 1, pp. 1027–1038, 2018, doi: 10.24247/ijmperdfeb2018123.
[19] H. Pačaiová and G. Ižaríková, “Base principles and practices for implementation of total productive maintenance in automotive industry,” Quality Innovation Prosperity, vol. 23, no. 1, pp. 45–59, 2019, doi: 10.12776/QIP.V23I1.1203.
[20] A. M. H. Pereira, M. R. Silva, M. A. G. Domingues, and J. C. Sá, “Lean six sigma approach to improve the production process in the mould industry: A case study,” Quality Innovation Prosperity, vol. 23, no. 3, pp. 103–121, 2019, doi: 10.12776/QIP.V23I3.1334.
[21] M. Sayuti, Juliananda, Syarifuddin, and Fatimah, “Analysis of the Overall Equipment Effectiveness (OEE) to Minimize Six Big Losses of Pulp machine: A Case Study in Pulp and Paper Industries,” in IOP Conference Series: Materials Science and Engineering, 2019. doi: 10.1088/1757-899X/536/1/012136.
[22] M. Gopalakrishnan, A. Skoogh, A. Salonen, and M. Asp, “Machine criticality assessment for productivity improvement: Smart maintenance decision support,” International Journal of Productivity and Performance Management, vol. 68, no. 5, pp. 858–878, 2019, doi: 10.1108/IJPPM-03-2018-0091.
[23] L. C. N. Corrales, M. P. Lambán, M. E. Hernandez Korner, and J. Royo, “Overall equipment effectiveness: Systematic literature review and overview of different approaches,” Applied Sciences (Switzerland), vol. 10, no. 18, 2020, doi: 10.3390/APP10186469.
[24] I. Šajdlerová, V. Schindlerová, and J. Kratochvíl, “Potential and Limits of OEE in the Total Productivity Management,” Advances in Science and Technology Research Journal, vol. 14, no. 2, pp. 19–26, 2020, doi: 10.12913/22998624/113617.
[25] A. Rozak, C. Jaqin, and H. Hasbullah, “Increasing overall equipment effectiveness in automotive company using DMAIC and FMEA method,” Journal Europeen des Systemes Automatises, vol. 53, no. 1, pp. 55–60, 2020, doi: 10.18280/jesa.530107.
[26] I. Leksic, N. Stefanic, and I. Veza, “The impact of using different lean manufacturing tools on waste reduction,” Advances in Production Engineering And Management, vol. 15, no. 1, pp. 81–92, 2020, doi: 10.14743/APEM2020.1.351.
[27] G. Pinto, F. J. G. Silva, N. O. Fernandes, R. Casais, A. Baptista, and C. Carvalho, “Implementing a maintenance strategic plan using TPM methodology,” International Journal of Industrial Engineering and Management, vol. 11, no. 3, pp. 192–204, 2020, doi: 10.24867/IJIEM-2020-3-264.
[28] C. Jaqin, A. Rozak, and H. H. Purba, “Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-do-check-act Cycle,” International Journal of Engineering, Transactions B: Applications, vol. 33, no. 11, pp. 2245–2251, 2020, doi: 10.5829/ije.2020.33.11b.16.
[29] Z. T. Xiang and C. J. Feng, “Implementing total productive maintenance in a manufacturing small or medium-sized enterprise,” Journal of Industrial Engineering and Management, vol. 14, no. 2, pp. 152–175, 2021, doi: 10.3926/jiem.3286.
[30] T. Haddad, B. W. Shaheen, and I. Németh, “Improving Overall Equipment Effectiveness (OEE) of Extrusion Machine Using Lean Manufacturing Approach,” Manufacturing Technology, vol. 21, no. 1, pp. 56–64, 2021, doi: 10.21062/mft.2021.006.
[31] P. Marinho, D. Pimentel, R. Casais, F. J. G. Silva, J. C. Sá, and L. P. Ferreira, “Selecting the best tools and framework to evaluate equipment malfunctions and improve the OEE in the cork industry,” International Journal of Industrial Engineering and Management, vol. 12, no. 4, pp. 286–298, 2021, doi: 10.24867/IJIEM-2021-4-295.
[32] J. C. Quiroz-Flores and M. L. Vega-Alvites, “REVIEW LEAN MANUFACTURING MODEL OF PRODUCTION MANAGEMENT UNDER THE PREVENTIVE MAINTENANCE APPROACH TO IMPROVE EFFICIENCY IN PLASTICS INDUSTRY SMES: A CASE STUDY,” South African Journal of Industrial Engineering, vol. 33, no. 2, pp. 143–156, 2022, doi: 10.7166/33-2-2711.
[33] G. Tortorella et al., “The impact of Industry 4.0 on the relationship between TPM and maintenance performance,” Journal of Manufacturing Technology Management, vol. 33, no. 3, pp. 489–520, 2022, doi: 10.1108/JMTM-10-2021-0399.
[34] Z. Huang, C. Jowers, D. Kent, A. Dehghan-Manshadi, and M. S. Dargusch, “The implementation of Industry 4.0 in manufacturing: from lean manufacturing to product design,” International Journal of Advanced Manufacturing Technology, vol. 121, no. 5–6, pp. 3351–3367, 2022, doi: 10.1007/s00170-022-09511-7.
[35] N. Muhammad, A. Upadhyay, A. Kumar, and H. Gilani, “Achieving operational excellence through the lens of lean and Six Sigma during the COVID-19 pandemic,” International Journal of Logistics Management, vol. 33, no. 3, pp. 818–835, 2022, doi: 10.1108/IJLM-06-2021-0343.
[36] Z.-R. Zhou, X.-Q. Xiong, J.-X. Wang, and H.-T. Bai, “Equipment Management of Customized Furnishing Manufacturers Based on Total Productive Maintenance,” Chinese Journal of Wood Science and Technology, vol. 36, no. 3, pp. 20–25, 2022, doi: 10.12326/j.2096-9694.2021169.
[37] E. Michlowicz, “Assessment of the modernized production system through selected TPM method indicators,” Eksploatacja i Niezawodnosc, vol. 24, no. 4, pp. 677–686, 2022, doi: 10.17531/ein.2022.4.8.
[38] D. Klimecka-Tatar and M. Ingaldi, “Digitization of processes in manufacturing SMEs - Value stream mapping and OEE analysis,” in Procedia Computer Science, 2022, pp. 660–668. doi: 10.1016/j.procs.2022.01.264.
[39] Y.-H. Hung, L. Y. O. Li, and T. C. E. Cheng, “Uncovering hidden capacity in overall equipment effectiveness management,” Int J Prod Econ, vol. 248, 2022, doi: 10.1016/j.ijpe.2022.108494.
[40] S. Singh, J. S. Khamba, and D. Singh, “Analysis of potential factors affecting execution of overall equipment effectiveness in Indian sugar mills,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 237, no. 6, pp. 2323–2333, 2023, doi: 10.1177/09544089221135010.
[41] S. D. Luozzo, F. Starnoni, and M. M. Schiraldi, “On the relationship between human factor and overall equipment effectiveness (OEE): An analysis through the adoption of analytic hierarchy process and ISO 22400,” International Journal of Engineering Business Management, vol. 15, 2023, doi: 10.1177/18479790231188548.
[42] A. Abedin, “Improvement of Overall Equipment Efficiency with Root Cause Analysis and TPM Strategy: a Case Study,” International Journal of Research in Industrial Engineering, vol. 12, no. 3, pp. 205–220, 2023, doi: 10.22105/riej.2023.393216.1388.
[43] S. Supriyati and T. N. Wiyatno, “Monitoring Performance of Two-Wheeled Automotive Component Painting Service Companies Through the Implementation of TPM,” Journal of Applied Research on Industrial Engineering, vol. 10, no. 4, pp. 637–653, 2023, doi: 10.22105/jarie.2023.382641.1522.
[44] N. Shannon, A. Trubetskaya, J. Iqbal, and O. McDermott, “A total productive maintenance & reliability framework for an active pharmaceutical ingredient plant utilising design for Lean Six Sigma,” Heliyon, vol. 9, no. 10, 2023, doi: 10.1016/j.heliyon.2023.e20516.
[45] R. Mohan, J. P. Roselyn, and R. A. Uthra, “LSTM based artificial intelligence predictive maintenance technique for availability rate and OEE improvement in a TPM implementing plant through Industry 4.0 transformation,” J Qual Maint Eng, vol. 29, no. 4, pp. 763–798, 2023, doi: 10.1108/JQME-07-2022-0041.
[46] M. Hermans and P. Tamás, “OVERALL EQUIPMENT EFFICIENCY, TOTAL PRODUCTIVE MAINTENANCE AND DIGITAL TWIN TECHNOLOGIES - A LITERATURE REVIEW,” Academic Journal of Manufacturing Engineering, vol. 22, no. 2, pp. 129–137, 2024.
[47] S. S. Rathi, M. K. Sahu, and S. Kumar, “Implementation of lean manufacturing methods to improve rolling mill productivity,” International Journal of Advanced Technology and Engineering Exploration, vol. 11, no. 111, pp. 243–256, 2024, doi: 10.19101/IJATEE.2023.10102004.
[48] M. T. Gelaw, D. K. Azene, and E. Berhan, “Assessment of critical success factors, barriers and initiatives of total productive maintenance (TPM) in selected Ethiopian manufacturing industries,” J Qual Maint Eng, vol. 30, no. 1, pp. 51–80, 2024, doi: 10.1108/JQME-11-2022-0073.
[49] F. Sumasto et al., “Enhancing Overall Equipment Effectiveness in Indonesian Automotive SMEs: A TPM Approach,” Journal Europeen des Systemes Automatises, vol. 57, no. 2, pp. 383–396, 2024, doi: 10.18280/jesa.570208.
[50] S. Castañeda, S. Rodriguez, O. Yildiz, D. Aranda, and J. C. Alvarez, “Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies,” International Journal of Engineering Trends and Technology, vol. 72, no. 8, pp. 128–138, 2024, doi: 10.14445/22315381/IJETT-V72I8P114.
[51] J. Biswas, “Total Productive Maintenance: An In-depth Review with a Focus on Overall Equipment Effectiveness Measurement,” International Journal of Research in Industrial Engineering, vol. 13, no. 4, pp. 376–383, 2024, doi: 10.22105/riej.2024.453380.1436.
[52] A. Mares Castro and J. Ramírez Pérez, “APPLICATION OF TOTAL PRODUCTIVE MAINTENANCE IN A MANUFACTURING PROCESS OF CARDBOARD BOXES UNDER LEAN SIX SIGMA DMAIC METHODOLOGY,” South African Journal of Industrial Engineering, vol. 35, no. 4, pp. 37–51, 2024, doi: 10.7166/35-4-3068.
Descargas
Publicado
Cómo citar
Descargas
Número
Sección
Licencia
Derechos de autor 2025 AiBi Revista de Investigación, Administración e Ingeniería
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
La revista ofrece acceso abierto bajo una Licencia Creative Commons Attibution License
Esta obra está bajo una licencia Creative Commons Attribution (CC BY 4.0).
