Rutting rendimiento de mezclas asfálticas que contienen tratadas RCA y reforzadas con fibras de carbono

Autores/as

DOI:

https://doi.org/10.15649/2346030X.3436

Palabras clave:

mezclas bituminosas en caliente, fibras de carbono, roderas, ensayo de seguimiento de ruedas, RCA

Resumen

Este estudio examinó el rutting rendimiento de mezclas asfálticas calientes que contienen agregado de concreto reciclado tratado y reforzado con fibras de carbono. La metodología consistió en sustituir RCA en lugar de agregados vírgenes gruesos en los diversos porcentajes (20, 40, 60, 80 y 100%) que se trataron sumergiendo durante 24 horas en una solución de ácido acético con una concentración de 0,1M. Las fibras de carbono se agregaron en varios porcentajes de 0.15, 0.25 y 0.35% por todo el peso de la mezcla. El estudio encuentra que la incorporación de RCA y fibras de carbono no afectó sustancialmente las características volumétricas de las mezclas asfálticas, pero la estabilidad de Marshall aumentó. La combinación que contenía 60% de RCA y 0,35% de fibras de carbono mostró el mayor aumento en la estabilidad de Marshall, que fue de 35,81% sobre la mezcla de control. La adición de RCA condujo a una reducción en el rendimiento de surco, mientras que la adición de fibras de carbono lo aumentó. La combinación que incorporó 40% de RCA y 0,35% de fibras de carbono exhibió una profundidad mínima de surco de 40,64% menor que la mezcla de control. La combinación que incorporó 20% de RCA y 0,35% de fibras de carbono exhibió el nivel máximo de estabilidad dinámica, que fue 1,64 veces mayor que la mezcla de control.

Referencias

Saleem, A. A., & Ismael, M. Q., “Assessment resistance potential to moisture damage and rutting for HMA mixtures reinforced by steel fibers,” Civil Engineering Journal, vol. 6, no. 9, pp. 1726-1738, 2020. http://dx.doi.org/10.28991/cej-2020-03091578.

AL-Mosawe, G. A., & Al-Mosawe, H. M., “Study the Effect of using RAP in Warm Mix Asphalt Pavement,” Journal of Engineering, vol. 29, no. 7, pp. 153-168, 2023. https://doi.org/10.31026/j.eng.2023.07.10.

Ismael, M. Q., Fattah, M. Y., & Jasim A. F., “Permanent deformation characterization of stone matrix asphalt reinforced by different types of fibers,” Journal of Engineering, vol. 28, no. 2, pp. 99-116, 2022. https://doi.org/10.31026/j.eng.2022.02.07.

Raof, H. B., & Ismael, M. Q., “Effect of polyphosphoric acid on rutting resistance of asphalt concrete mixture,” Civil Engineering Journal, vol. 5, no. 9, pp. 1929-1940, 2019. https://doi.org/10.28991/cej-2019-03091383.

Albayati, A. H., “Influence of temperature upon permanent deformation parameters of asphalt concrete mixes,” Journal of Engineering, vol. 23, no. 7, pp. 14-32, 2017.

Rozo-Verjel, E. J., & Pérez-Fernández, B. J. “Decalogue of road safety for the reduction of risks in road users, motorcycle drivers, belonging to a Colombian company,” AiBi Revista de Investigación, Administración e Ingeniería, vol. 9, no. 2, pp. 40-52, 2021. https://doi.org/10.15649/2346030X.779.

Henao-Pereira, J. P., Tovar-León, A. E., Castillo-Landinez, S. P., & Caicedo-Rodriguez, P. E. “Traffic accidents from the perspective of data mining A review of the literature,” AiBi Revista de Investigación, Administración e Ingeniería, vol. 8, No. 2, pp. 133-141, 2020.‏ https://doi.org/10.15649/2346030X.743.

Ismael, M.Q., Fattah, M. Y., & Jasim, A. F., “Improving the rutting resistance of asphalt pavement modified with the carbon nanotubes additive,” Ain Shams Engineering Journal, vol. 12, no. 4, pp. 3619-3627, 2021. https://doi.org/10.1016/j.asej.2021.02.038.

Taher, Z. K., & Ismael, M. Q., “Moisture Susceptibility of Hot Mix Asphalt Mixtures Modified by Nano Silica and Subjected to Aging Process,” Journal of Engineering, vol. 29, no. 4, pp. 128-143, 2023. https://doi.org/10.31026/j.eng.2023.04.09.

Taher, Z. K., & Ismael, M. Q., “Rutting prediction of hot mix asphalt mixtures modified by nano silica and subjected to aging process,” Civil Engineering Journal, vol. 9, pp. 1-14, 2022. http://dx.doi.org/10.28991/CEJ-SP2023-09-01.

Du, Y., Chen, J., Han, Z., & Liu, W., “A review on solutions for improving rutting resistance of asphalt pavement and test methods,” Construction and Building Materials, vol. 168, no. 8, pp. 93-90, 2018. https://doi.org/10.1016/j.conbuildmat.2018.02.151.

Wang, H., Liu, X., & Hao, P., “Evaluating the Shear Resistance of Hot Mix Asphalt by the Direct Shear Test,” Journal of testing and evaluation, vol. 36, no. 6, pp. 485-491, 2008.

Naser, M., Tasim, M., Al-shamayleh, R., Louzi, N., & Ibrahim, R., “Evaluating the effects of using reclaimed asphalt pavement and recycled concrete aggregate on the behavior of hot mix asphalts,” Transportation Engineering, vol. 10, 100140, 2022. https://doi.org/10.1016/j.treng.2022.100140.

Almuhmdi, A. D., Muhmood, A. A., & Salih, A. O., “Effects of crushed glass waste as a fine aggregate on properties of hot asphalt mixture,” Tikrit Journal of Engineering Sciences, vol. 28, no. 3, pp. 129-145, 2021. https://doi.org/10.25130/tjes.28.3.10.

Ismael, M. Q., Joni, H. H., & Fattah, M. Y., “Neural network modeling of rutting performance for sustainable asphalt mixtures modified by industrial waste alumina,” Ain Shams Engineering Journal, vol. 14, no. 5, 101972, 2023. https://doi.org/10.1016/j.asej.2022.101972.

Albayati, N., & Ismael, M. Q., “Effect of carbon fibers (length, dosage) on the Marshall and volumetric properties of HMA mixtures,” AiBi Journal of Research, Administration and Engineering, vol. 11, no. 3, pp. 71–80, 2023. https://doi.org/10.15649/2346030X.3243.

Bhusal, S., Li, X., & Wen, H., “Evaluation of effects of recycled concrete aggregate on volumetrics of hot-mix asphalt,” Transportation research record, vol. 2205, no. 1, pp. 36-39, 2011. https://doi.org/10.3141/2205-05.

Zuluaga-Astudillo, D., Rondón-Quintana, H., & Zafra-Mejía, C., “Mechanical performance of gilsonite modified asphalt mixture containing recycled concrete aggregate,” Applied Sciences, vol. 11, no. 10, 4409, 2021. https://doi.org/10.3390/app11104409.

Nazal, H. H., & Ismael, M. Q., “Evaluation the moisture susceptibility of asphalt mixtures containing demolished concrete waste materials,” Civil Engineering Journal, vol. 5, no. 4, pp. 845-855, 2019. http://dx.doi.org/10.28991/cej-2019-03091293.

Sapkota, K., Yaghoubi, E., Wasantha, P. L. P., Van Staden, R., Fragomeni, S., “Mechanical characteristics and durability of HMA made of recycled aggregates,” Sustainability, vol. 15, no. 6, 5594, 2023. https://doi.org/10.3390/su15065594.

Al-Bayati, H., Tighe, S., & Achebe, J., “Influence of recycled concrete aggregate on volumetric properties of hot mix asphalt,” Resources, Conservation and Recycling, vol. 130, pp. 200-214, 2018. https://doi.org/10.1016/j.resconrec.2017.11.027.

Al-Saad, A. A., & Ismael, M. Q., “Rutting prediction of hot mix asphalt mixtures reinforced by ceramic fibers,” journal of Applied Engineering Science, vol. 20, no. 4, pp. 1345-1354, 2022. https://doi.org/10.5937/jaes0-38956.

Shaopeng, W., Jinjun, Z., Jiqing, Z., & Dongming, W., “Influence of demolition waste used as recycled aggregate on performance of asphalt mixture,” Road Materials and Pavement Design, vol. 1, no. 3, pp. 679–688, 2013. https://doi.org/10.1080/14680629.2013.779304.

Gul, W. A., & Guler, M., “Rutting susceptibility of asphalt concrete with recycled concrete aggregate using revised marshall procedure,” Construction and Building Materials, vol. 55, pp. 341-349, 2014. https://doi.org/10.1016/j.conbuildmat.2014.01.043.

Fatemi, S., & Imaninasab, R., “Performance evaluation of recycled asphalt mixtures by construction and demolition waste materials,” Construction and Building Materials, vol. 120, pp. 450-456, 2016. http://doi:10.1016/j.conbuildmat.2016.05.117.

Radević, A., Đureković, A., Zakić, D., “Mladenović G. Effects of recycled concrete aggregate on stiffness and rutting resistance of asphalt concrete,” Construction and Building Materials, vol. 136, pp. 386-393, 2017. https://doi.org/10.1016/j.conbuildmat.2017.01.043.

Nwakaire, C., Yap, S., & Yuen, C., “Laboratory study on recycled concrete aggregate-based asphalt mixtures for sustainable flexible pavement surfacing,” Journal of Cleaner Production, vol. 262, 121462, 2020. https://doi.org/10.1016/j.jclepro.2020.121462.

Mills-Beale, J., & You, Z., “The mechanical properties of asphalt mixtures with recycled concrete aggregates,” Construction and Building Materials, vol. 24, no. 3, pp. 230-235, 2010. https://doi.org/10.1016/j.conbuildmat.2009.08.046.

Bhusal, S., Li, X., & Wen, H., “Evaluating recycled concrete aggregate as hot mix asphalt aggregate,” Advances in Civil Engineering Materials, vol. 2, no. 1, 20120053, 2013. https://doi.org/10.1520/acem20120053.

Motter, J. S., Miranda, L. F. R., & Bernucci, L. L. B., “Performance of hot mix asphalt concrete produced with coarse recycled concrete aggregate,” Journal of Materials in Civil Engineering, vol. 27, no. 11, 04015030, 2015. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001284.

Kareem, A., Nikraz, H., & Asadi, H., “Evaluation of the double coated recycled concrete aggregates for hot mix asphalt,” Construction and Building Materials, vol. 172, pp. 544-552, 2018. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003028.

Al-Bayati, H. K. A., & Tighe, S. L., “Effect of recycled concrete aggregate on rutting and stiffness characteristics of asphalt mixtures,” Journal of materials in civil engineering, vol. 31, no. 10, 04019219, 2019. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002810.

Abass, B., & Albayati, A., “Influence of recycled concrete aggregate treatment methods on performance of sustainable warm mix asphalt,” Cogent Engineering, vol. 7, no. 1, 1718822, 2020. https://doi.org/10.1080/23311916.2020.1718822.

Azarhoosh, A., Koohmishi, M., & Hamedi, G. H., “Rutting resistance of hot mix asphalt containing coarse recycled concrete aggregates coated with waste plastic bottles,” Advances in Civil Engineering, pp. 1-11, 2011. https://doi.org/10.1155/2021/9558241.

Jahromi, S., & Khodaii, A., “Carbon fiber reinforced asphalt concrete,” Arabian Journal for Science & Engineering, vol. 33, 2008.

Geckil, T., & Ahmedzade, P., “Effects of carbon fibre on performance properties of asphalt mixtures,” Baltic Journal of Road and Bridge Engineering, vol. 15, no. 2, pp. 49-65, 2020. https://doi.org/10.7250/bjrbe.2020-15.472.

Mawat, H. Q., & Ismael, M. Q., “Assessment of moisture susceptibility for asphalt mixtures modified by carbon fibers,” Civil Engineering Journal, vol. 6, no. 2, pp. 304-317, 2020. http://dx.doi.org/10.28991/cej-2020-03091472.

Descargas

Publicado

01-01-2024

Cómo citar

[1]
N. Albayati y M. Qadir-Ismael, «Rutting rendimiento de mezclas asfálticas que contienen tratadas RCA y reforzadas con fibras de carbono», AiBi Revista de Investigación, Administración e Ingeniería, vol. 12, n.º 1, pp. 18–28, ene. 2024.

Número

Sección

Artículos de Investigación

Altmetrics

Descargas

Los datos de descargas todavía no están disponibles.