Effect of carbon fibers (length, dosage) on the Marshall and volumetric properties of HMA mixtures
DOI:
https://doi.org/10.15649/2346030X.3243Keywords:
Marshall Stability, Recycled Concrete Aggregate, Carbon Fibers, Asphalt Cement, HMAAbstract
This study investigates the effect of carbon fibers when added to HMA containing recycled concrete aggregate on Marshall properties. It is included to identify the optimum asphalt contents according to the Marshall design method for mixtures containing 20, 40, 60, 80, and 100% coarse recycled concrete replaced with coarse virgin aggregate. Two lengths of 10 and 20 mm of carbon fibers had been added with three percentages of 0.15, 0.25, and 0.35% to the total weight of the mixture. The results showed all mixtures containing recycled concrete aggregate met SCRB 2003 Iraqi standard requirements for wearing coarse type IIIA. Replacement of virgin aggregate by recycled concrete aggregate led to an increase in optimum asphalt contents, in which the maximum increase reached 10.78% over the control mixture when 100% of coarse recycled concrete aggregate was utilized. The Marshall characteristics were altered with carbon fiber, which increased stability. The highest level of stability reached about 38.89% over the control mixture when using 60% recycled concrete aggregate and reinforced by 0.35% carbon fibers had a length of 20mm.
References
Henao-Pereira, J. P., Tovar-León, A. E., Castillo-Landinez, S. P., & Caicedo-Rodriguez, P. E. “Traffic accidents from the perspective of data mining A review of the literature,” AiBi Revista de Investigación, Administración e Ingeniería, vol. 8. No. 2, pp. 133-141, 2020.
Rozo-Verjel, E. J., & Pérez-Fernández, B. J. “Decalogue of road safety for the reduction of risks in road users, motorcycle drivers, belonging to a Colombian company,” AiBi Revista de Investigación, Administración e Ingeniería, vol. 9, no. 2, pp. 40-52, 2021.
Samantha, A. A, “The skeletal structure of hot mix asphalt and the effects of fiber additives.” M.S. Thesis, The University of Texas Rio Grande Valley, USA, 2021.
Ali, S., & Ismael, M. Q, “Improvement of Marshall properties for hot mix asphalt by using ceramic fiber,” Kufa Journal of Engineering, vol. 12, no. 1, pp. 48-58, 2021.
Al-Saad, A. A, & Ismael, M. Q, “Rutting prediction of hot mix asphalt mixtures reinforced by ceramic fibers,” Journal of Applied Engineering Science, vol. 20, no. 4, pp. 1345-1354, 2022.
Taher, Z. K, & Ismael, M. Q, “Moisture Susceptibility of Hot Mix Asphalt Mixtures Modified by Nano Silica and Subjected to Aging Process,” Journal of Engineering, vol. 29, no. 4, pp. 128-143, 2023.
Jasim, S., & Ismael, M. Q, “Marshall performance and volumetric properties of styrene-butadiene-styrene modified asphalt mixtures,” Civil Engineering Journal, vol. 7, no. 6, pp. 1050-1059, 2021.
Hashim, R. R, “Piezoresistive Hot Mix Asphalt (HMA) Mixtures modified with Carbon Nano-fibers Development and Application as Smart HMA,” Ph.D. dissertation, University of Louisiana, USA, 2016.
Albayati, A. H, “Influence of temperature upon permanent deformation parameters of asphalt concrete mixes,” Journal of Engineering, vol. 23, no. 7, pp. 14-32, 2017.
Al-Bayati, H., Tighe, S., & Achebe, J., “Influence of recycled concrete aggregate on volumetric properties of hot mix asphalt. Resources,” Conservation and Recycling, vol. 130, pp. 200-214, 2018.
AL-Mosawe, G. A., & Al-Mosawe, H. M, “Study the Effect of using RAP in Warm Mix Asphalt Pavement,” Journal of Engineering, vol. 29, no. 7, pp. 153-168, 2023.
Siriwardane, H., Gondle, R., & Kutuk, B, “Analysis of flexible pavements reinforced with geogrids,” Geotechnical and Geological Engineering, vol. 28, pp. 287-297, 2010.
Nazal, H., & Ismael, M. Q, “Evaluation the moisture susceptibility of asphalt mixtures containing demolished concrete waste materials,” Civil Engineering Journal, vol. 5, no. 4, pp. 845-855, 2019.
Ismael, M. Q, Joni, H., & Fattah, M, “Neural network modeling of rutting performance for sustainable asphalt mixtures modified by industrial waste alumina,” Ain Shams Engineering Journal, vol. 14, no. 5, 101972, 2023.
Mills-Beale, J., & You, Z, “The mechanical properties of asphalt mixtures with recycled concrete aggregates,” Construction and Building Materials, vol. 24, no. 3, pp. 230-235, 2010.
Gul, W. A., “Effect of recycled cement concrete content on rutting behavior of asphalt concrete,” Civil Engineering Department, M.S. Thesis, Middle East Technical University, Turkey, 2008.
Gedik, A, “A review on the evaluation of the potential utilization of construction and demolition waste in hot mix asphalt pavements,” Resources, Conservation and Recycling, vol. 161, 104956, 2020.
Gómez-Meijide, B., & Pérez, I, “Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures,” Construction and Building Materials, vol. 51, pp. 267-277, 2014.
Pasandín, A. R., & Pérez, I, “Laboratory evaluation of hot-mix asphalt containing construction and demolition waste,” Construction and Building Materials, vol. 43, pp. 497-505, 2013.
Al-Bayati, H. K. A, & Tighe, S. L, “Effect of recycled concrete aggregate on rutting and stiffness characteristics of asphalt mixtures,” Journal of Materials in Civil Engineering, vol. 31, no. 10, 2019.
Du, Y., Chen, J., Han, Z., & Liu, W, “A review on solutions for improving rutting resistance of asphalt pavement and test methods,” Construction and Building Materials, vol. 168, pp. 893-905, 2013.
Wang, H., Liu, X., & Hao, P, “Evaluating the shear resistance of hot mix asphalt by the direct shear test,” Journal of testing and evaluation, vol. 36, no. 6, pp. 485-491, 2008.
Ashraf, A, “Fiber dosage effects in asphalt binders and hot mix asphalt mixtures,” M.S. thesis, Arizona State University, USA, 2012.
Mawat, H., & Ismael, M. Q, “Assessment of moisture susceptibility for asphalt mixtures modified by carbon fibers,” Civil Engineering Journal, vol. 6, no. 2, pp. 304-317, 2020.
Moghadas Nejad, F., Vadood, M., & Baeetabar, S, “Investigating the mechanical properties of carbon fibre-reinforced asphalt concrete,” Road materials and pavement design, vol. 15, no. 2, pp. 465-475, 2014.
Alfalah, A., Offenbacker, D., Ali, A., Decarlo, C., Lein, W., Mehta, Y., & Elshaer, M, “Assessment of the impact of fiber types on the performance of fiber-reinforced hot mix asphalt,” Transportation Research Record, vol. 2674, no. 4, pp. 337-347, 2020.
Eisa, M. S., Basiouny, M. E., & Daloob, M. I, “Effect of adding glass fiber on the properties of asphalt mix,” International Journal of Pavement Research and Technology, vol. 14, pp. 403-409, 2021.
Enieb, M., Diab, A., & Yang, X, “Short-and long-term properties of glass fiber reinforced asphalt mixtures,” International Journal of Pavement Engineering, vol. 22, no. 1, pp. 64-76, 2021.
Park, K. S., Shoukat, T., Yoo, P. J., & Lee, S. H, “Strengthening of hybrid glass fiber reinforced recycled hot-mix asphalt mixtures,” Construction and Building Materials, vol. 258, 118947, 2020.
Ziari, H., Aliha, M. R. M., Moniri, A., & Saghafi, Y, “Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber,” Construction and Building Materials, vol. 230, 117015, 2020.
Wang, X., Zhou, H., Hu, X., Shen, S., & Dong, B, “Investigation of the performance of ceramic fiber modified asphalt mixture,” Advances in Civil Engineering, vol. 2021, pp. 1-10, 2021.
Arabani, M., & Shabani, A, “Evaluation of the ceramic fiber modified asphalt binder,” Construction and Building Materials, vol. 205, pp. 377-386, 2019.
Zhao, H., Guan, B., Xiong, R., & Zhang, A, “Investigation of the performance of basalt fiber reinforced asphalt mixture,” Applied Sciences, vol. 10, no. 5, 1561, 2020.
Guo, F., Li, R., Lu, S., Bi, Y., & He, H, “Evaluation of the effect of fiber type, length, and content on asphalt properties and asphalt mixture performance,” Materials, vol. 13, no. 7, 1556, 2020.
Ismael, M. Q, Fattah, M., & Jasim, A, “Permanent deformation characterization of stone matrix asphalt reinforced by different types of fibers,” Journal of Engineering, vol. 28, no. 2, pp. 99-116, 2022.
Geckil, T., & Ahmedzade, P, “Effects of carbon fibre on performance properties of asphalt mixtures,” Baltic Journal of Road and Bridge Engineering, vol. 15, no. 2, pp. 49-65, 2020.
Downloads
Published
How to Cite
Issue
Section
Altmetrics
Downloads
License
Copyright (c) 2023 AiBi Journal of Research, Administration and Engineering
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The journal offers open access under a Creative Commons Attibution License
![Licencia Creative Commons](https://i.creativecommons.org/l/by/4.0/88x31.png)
This work is under license Creative Commons Attribution (CC BY 4.0).