Los áridos ligeros para los hormigones a base de residuos vegetales
DOI:
https://doi.org/10.15649/2346075X.2953Keywords:
Lightweight material, Granulated harmless aggregate, Wood processing waste, Modifying additives, Resource- and energy-saving technologiesAbstract
Introduction: The increase in the volume of housing construction per capita per year to the level of the eco-nomically developed countries, the tasks of further progressive economic and social develop-ment of the country can be achieved with a corresponding increase in the production of con-struction materials. Materials and Methods: The solution of this task is largely connected with the development of resource- and energy-saving technologies for the production of efficient light construction materials based on wastes from various industries, in particular on wastes of plant origin, which contributes to the expansion of the production range of light, smooth granulated aggregates and light insulating concrete based on them with modifying additives that increase and improve the physical and technical characteristics of these materials. Results and Discussion: There are known technologies for producing light aggregates, mainly by firing. As energy re-sources became more expensive, there was an urgent need to develop easy-to-fill technology in a cost-effective manner. Conclusions: This paper considers a method for producing a light aggregate based on wood processing waste by granulation in a dish granule torus, which is a plate with an inclination angle of 45 0 and the number of mob companies 17-19 rev/min.
References
Issabayev G, Slyambayeva A, Kelemeshev A, Amandykova D. Development of the project of modular prefabricated buildings. EUREKA, Phys & Engin. 2022. 4: 36–45. https://doi.org/10.21303/2461-4262.2022.002499
Yestemesova AS, Altaeva ZN, Aimenov ZhT. Shungite waste – an effective mineral additive for concrete modification. Innov & Tech in Constr Select Pap of Build. 2020. 2020: 39-43. https://doi.org/10.1007/978-3-030-54652-6_8
Yestemessova АS, Altayeva ZN, Sarsenbayev BK, Budikova AM, Karshygayev RO. Modifying additive for concrete based on shungite processing waste. IOP Conf S: Mat Sci & Eng. 2020: 71-83. https://doi.org/10.1088/1757-899X/945/1/012042
Shevchuk MO, Bezborodov VS, Shishakov EP, Zilbergleit MA, Yakubovsky SF. Problems and achievements of vegetable raw materials processing. Bull of the Pol S U. S B. Ind. Appl Sci. Chem Techn. Occupat Saf & Health. 2017. 11: 95–102.
Grinshpan D. Good real world example of wood-based sustainable chemistry. Sustain Chem & Pharm. 2017. 5: 1–13. https://doi.org/10.1016/j.scp.2016.11.001
Litvyak VV. Atlas: morphology of polysaccharides. Astana: EDIGE LLP, 335 p, 2016.
Aymenov AZh, Khudyakova TM, Sarsenbayev BK. Studying the mineral additives effect on a composition and properties of a composite binding agent. Or J of Chem. 2018. 34(4): 1945-1955. https://doi.org/10.13005/ojc/3404031
Medvedeva GA, Lifantyeva AF. The research of multilayer outer fencing including materials using ash and slag waste of thermal power plants. Constr Mat & Prod. 2020. 3(2): 29–35. DOI: 10.34031/2618-7183-2020-3-2-29-35. https://doi.org/10.34031/2618-7183-2020-3-2-29-35
Lesovik VS, Absimetov MV, Elistratkin MYu, Pospelova MA, Shatalova SV. For the study of peculiarities of structure formation of composite binders for non-autoclaved aerated concrete. Constr Mat & Prod. 2019. 2(3): 41–47. https://doi.org/10.34031/2618-7183-2019-2-3-41-47
Bessmertny VS, Kochurin DV, Bragina LL, Varfolomeeva SV. A block of thermal insulation materials with protective and decorative coatings. Constr Mat & Prod. 2019. 2(1): 4–10. https://doi.org/10.34031/2618-7183-2019-2-1-4-10
Bondarenko NI, Bondarenko DO, Kochurin DV, Bragina LL, Varfolomeeva SV. Technology of plasma metallization of the wood and fibrous board. Constr Mat & Prod. 2018. 1(3): 4–10.
Bessmertny VS, Kochurin DV, Bondarenko DO, Bragina LL, Yalovenko TA. Vitreous protective and decorative coverings on wood particle board. Constr Mat & Prod. 2018. 1(4): 4–12. https://doi.org/10.34031/2618-7183-2018-1-4-4-12
Abramyan SG, Burlachenko OV, Oganesyan OV. The use of composite materials in the reconstruction of floors of industrial buildings. Constr Mat & Prod. 2019. 2(3): 58–64. https://doi.org/10.34031/2618-7183-2019-2-3-58-64
Tolstoy AD. Fine-grained high-strength concrete. Constr Mat & Prod. 2020. 3(1): 39–43. DOI: 10.34031/2618-7183-2020-3-1-39-43. https://doi.org/10.34031/2618-7183-2020-3-1-39-43
Ivanova VN. Processing high-yield fibrous semi-finished products. IVUZ, Fore J. 2017. 6: 15-17.
Gavshina OV, Yashkina SYu, Yashkin AN, Doroganov VA, Moreva IYu. Study of the effect of particulate additives on the setting time and microstructure of high-alumina cement. Constr Mat & Prod. 2018. 1(4): 30–37. https://doi.org/10.34031/2618-7183-2018-1-4-30-37
Sarsenbayev BK. Development and testing of low-energy-intensive technology of portlandcement. Euras Chem-Technol J. 2017. 19(4): 347-355. https://doi.org/10.18321/ectj683
Tolegen Zh, Moldabekov M, Koshenov K, Mugzhanova G. Roles of public ethnocultural spaces in Kazakhstan. Astr Salven. 2018. 6(1): 761–774.
Ivanova VN, Makhotina LG. Prospects for the use of marketable types of cellulose for the production of products with high added value. Mytish: Chem fibers. 2018. 4: 25-26.
Khviyuzov СС, Bogolitsyn KG, Gusakova MA, Zubov IN. Estimation of lignin content in wood by IR spectroscopy. Bas Res. 2015. 9(1): 87-90.
Shapovalova I, Vurasko A, Petrov L, Kraus E., Leicht H, Heilig M, Stoyanov O. Hybrid composites based on technical cellulose from rice husk. J of Appl Pol Sci. 2018. 135(5): Article number 45796. https://doi.org/10.1002/app.45796
Smolin AS, Komarov VI. The role of lignin in the technology of materials for corrugated cardboard. In: Materials IV International Scientific-Technical Conference “Problems of the mechanics of pulp and paper materials” (29-34). Arkhangelsk: M.V. Lomonosov Northern (Arctic) Federational University, 2017.
Zhilkibayeva A, Yestemessova A, Zhakipbekov S, Matveeva L. Structural characteristics and performance of concrete with a composite modifying additive. Archit & Eng. 2022. 7(2): 86-95. https://doi.org/10.23968/2500-0055-2022-7-2-86-95
Aymenov AZh, Sarsenbayev NB, Khudyakova TM, Sarsenbayev BK, Kopzhassarov BТ. Effect of additive of polymetallic ores’ tailings on properties of composite cements. Euras Chem-Techn J. 2016. 1(1): 153-160. https://doi.org/10.18321/ectj442
Kozhukhova NI, Strokova VV, Kozhukhova MI, Zhernovsky IV. Structure formation in alkali activated aluminosilicate binding systems using natural raw materials with different crystallinity degree. Constr Mat & Prod. 2018. 1(4): 38–43. https://doi.org/10.34031/2618-7183-2018-1-4-38-43
Elistratkin MYu, Minakov SV, Shatalova SV. Composite binding mineral additive influence on the plasticizer efficiency. Constr Mat & Prod. 2019. 2(2): 10–16. https://doi.org/10.34031/2618-7183-2019-2-2-10-16
Downloads
Published
How to Cite
Issue
Section
Altmetrics
Downloads
License
All articles published in this scientific journal are protected by copyright. The authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits sharing the work with authorship recognition and without commercial purposes.
Readers may copy and distribute the material from this journal issue for non-commercial purposes in any medium, provided the original work is cited and credit is given to the authors and the journal.
Any commercial use of the material from this journal is strictly prohibited without written permission from the copyright holder.
For more information on the copyright of the journal and open access policies, please visit our website.
