Caracterización de arreglo fotovoltaico para MPPT y convertidor boost

Jhon Edward Lizarazo-Parada; Aldo  Pardo-García; Jorge Luis Diaz-Rodríguez

doi:10.15649/2346030X.6274

Caracterización de arreglo fotovoltaico para MPPT y convertidor boost

Autores/as

Jhon Edward Lizarazo-Parada Servicio Nacional de Aprendizaje - Cúcuta, Colombia https://orcid.org/0000-0001-6079-8518
Aldo Pardo-García Universidad de Pamplona, Pamplona - Colombia https://orcid.org/0000-0003-2040-9420
Jorge Luis Diaz-Rodríguez Universidad de Pamplona, Pamplona - Colombia https://orcid.org/0000-0003-1324-4568

DOI:

https://doi.org/10.15649/2346030X.6274

Palabras clave:

convertidor boost, eficiencia, electrónica de potencia, energía renovable, fotovoltaico, irradiancia, modelado de sistemas, MPPT, perturbacion y observación P&O, PWM, raspberry pi, sistemas de control

Resumen

Este estudio presenta el desarrollo y la validación de un convertidor DC-DC tipo Boost diseñado para optimizar la transferencia de energía entre un arreglo fotovoltaico Amerisolar de 340W y una carga programable. La metodología integra la caracterización del panel mediante el modelo de dos diodos exponenciales (estándar IEC 60891) y el uso de la toolbox Simscape de MATLAB para el diseño preciso del controlador. El núcleo del sistema emplea una Raspberry Pi 5 programada en Python para ejecutar algoritmos MPPT, contrastando el desempeño del método de Perturbación y Observación (P&O) clásico frente a una versión de paso modificado. Los resultados experimentales demuestran que el algoritmo modificado, al incorporar un parámetro de conteo adicional, mejora significativamente la convergencia hacia el Máximo Global de Potencia (GMPP) bajo condiciones climáticas fluctuantes. Finalmente, el prototipo validó una eficiencia dinámica del 90% operando a una frecuencia de conmutación de 100 kHz, confirmando la robustez de los sistemas embebidos para mitigar inestabilidades producidas por transitorios de irradiancia.

Biografía del autor/a

Aldo Pardo-García, Universidad de Pamplona, Pamplona - Colombia

Tíulo: Automated Parameterization of Errors in Additive Manufacturing Parts for Data Feedback in Digital Manufacturing Systems

Revista: IEEE Access

Categoría de la Revista: Q1

Numero:

Paginas:

Año:2025

DOI: https://doi.org/10.1109/ACCESS.2025.3633685

Energy performance analysis of an edge-AI irrigation system for cocoa production in rural Colombia

Heritage and Sustainable Development

https://doi.org/10.37868/hsd.v7i2.1480
https://hsd.ardascience.com/index.php/journal/article/view/1480/248

Referencias

[1] F. A. Lara V, M. Padilla Ortiz, and C. Vargas Salgado, “Comparative experimental analysis of the annual energy production of a 72kWn photovoltaic solar power plant installed on a roof for self-consumption in the city of Monteria using PVsyst, PVGIS and SAM,” Rev. Colomb. Tecnol. Av., vol. 1, no. 43, pp. 43–2024, 2024, doi: 10.24054/rcta.v1i43.2807.

[2] M. H. Rashid, Power Electronics Handbook, Fifth. Florida, United States, 2024.

[3] H. Abidi and L. Sidhom, “Systematic Literature Review and Benchmarking for Photovoltaic MPPT Techniques,” Energies, vol. 16, 2023, doi: https://doi.org/10.3390/en16083509.

[4] C. Pavithra, S. Vidhyareni, M. Vijayadharshini, S. K. B. Akshaya, and N. Varsha, “Comparison of Solar P&O and FLC-based MPPT Controllers &Analysis under Dynamic Conditions,” EAI Endorsed Trans. Energy Web, vol. 11, pp. 1–6, 2024, doi: 10.4108/ew.4988.

[5] B. Yang, R. Xie, and Z. Guo, “Maximum Power Point Tracking Technology for PV Systems: Current Status and Perspectives,” Energy Eng. J. Assoc. Energy Eng., vol. 121, no. 8, pp. 2009–2022, 2024, doi: 10.32604/ee.2024.049423.

[6] E. J. Barbosa et al., “Hybrid GMPPT Technique for Photovoltaic Series Based on Fractional Characteristic Curve,” IEEE J. Photovoltaics, vol. 14, no. 1, pp. 170–177, 2024, doi: 10.1109/JPHOTOV.2023.3323774.

[7] S. Senthilkumar, V. Mohan, S. Mangaiyarkarasi, and M. Karthikeyan, “International Transactions on Electrical Energy Systems - 2015 - Tripathi - Optimum design of proportional‐integral.pdf.” 2022.

[8] Y. García, F. García, and J. A. Martín, “MATHEMATICAL MODEL FOR THE DETERMINATION OF VOLT-AMPERE CHARACTERISTICS IN SOLAR PHOTOCELLS,” 2022.

[9] M. Piliougine, P. Sánchez-Friera, and G. Spagnuolo, “Comparative of IEC 60891 and Other Procedures for Temperature and Irradiance Corrections to Measured I–V Characteristics of Photovoltaic Devices,” Energies, vol. 17, no. 3, 2024, doi: 10.3390/en17030566.

[10] N. Priyadarshi, S. M. Muyeen, M. S. Bhaskar, and F. Azam, “An improved standalone photovoltaic system with hybrid dual integral sliding mode and model predictive control for MPPT,” no. October 2021, pp. 1–15, 2023, doi: 10.1049/rpg2.12665.

[11] M. H. Rashid, Power Electronics Devices, Circuits & Applications 4/E, Fourth Edi. USA, Florida, 2014.

[12] M. Abouelela, Power electronics for practical implementation of PV MPPT. 2020. doi: 10.1007/978-3-030-05578-3_3.

[13] N. Hernández Díaz, A. Pardo Garcia, E. N. Sánchez Camperos, and C. J. Vega, “Implementación De Un Módulo Para El Control Y Gestión Del Almacenamiento De Energía En Una Microrred Eléctrica,” Rev. Colomb. Tecnol. Av., vol. 1, no. 37, pp. 91–98, 2023, doi: 10.24054/rcta.v1i37.1258.

[14] O. Semiconductor, “Switch−Mode Power Supply Reference Manual,” Semicond., vol. Rev4, p. 73, 2014, [Online]. Available: www.onsemi.com.

[15] M. Abdel-Salam, M. T. EL-Mohandes, and M. Goda, “History of maximum power point tracking,” Green Energy Technol., pp. 1–29, 2020, doi: 10.1007/978-3-030-05578-3_1.

[16] E. Muñoz-Palomeque, J. E. Sierra-García, and M. Santos, “Técnicas de control inteligente para el seguimiento del punto de máxima potencia en turbinas eólicas,” Rev. Iberoam. Automática e Informática Ind., vol. 21, no. 3, pp. 193–204, 2024, doi: 10.4995/riai.2024.21097.

[17] A. A. Alzubaidi, L. A. Khaliq, H. S. Hamad, W. K. Al-Azzawi, M. S. Jabbar, and T. A. Shihab, “MPPT implementation and simulation using developed P&O algorithm for photovoltaic system concerning efficiency,” Bull. Electr. Eng. Informatics, vol. 11, no. 5, pp. 2460–2470, 2022, doi: 10.11591/eei.v11i5.3949.

[18] A. M. Eltamaly and H. M. H. Farh, PV characteristics, performance and modelling. 2020. doi: 10.1007/978-3-030-05578-3_2.

[19] S. Ngo, C. S. Chiu, T. D. Ngo, and C. T. Nguyen, “A novel hybrid method based MPP tracking design using boost converter for solar power systems,” Int. J. Power Electron. Drive Syst., vol. 15, no. 1, pp. 506–517, 2024, doi: 10.11591/ijpeds.v15.i1.pp506-517.

[20] C. Restrepo, C. González-castaño, J. Muñoz, A. Chub, and S. Member, “An MPPT Algorithm for PV Systems Based on a Simplified Photo-Diode Model,” 2021, doi: 10.1109/ACCESS.2021.3061340.

[21] O. Abdalla, H. Rezk, and E. M. Ahmed, “Wind driven optimization algorithm based global MPPT for PV system under non-uniform solar irradiance,” Sol. Energy, vol. 180, no. August 2018, pp. 429–444, 2019, doi: 10.1016/j.solener.2019.01.056.

[22] H. M. H. Farh and A. M. Eltamaly, “Maximum power extraction from the photovoltaic system under partial shading conditions,” Green Energy Technol., pp. 107–129, 2020, doi: 10.1007/978-3-030-05578-3_4.

[23] D. M. Atia, Global maximum power point tracking-based computational intelligence techniques. 2020. doi: 10.1007/978-3-030-05578-3_5.

[24] A. Zouhri, “Advanced Perturb and Observe Algorithm for Maximum Power Point Tracking in Photovoltaic Systems With Adaptive Step Size,” J. Autom. Mob. Robot. Intell. Syst., vol. 18, no. 3, pp. 55–60, 2024, doi: 10.14313/JAMRIS/3-2024/22.

[25] F. García Reina, R. Rodríguez Rojas, T. Martínez Zamora, L. Y. Hernández Mora y F. Hernández Rodríguez, “Efficiency of conversion of energy from solar radiation into internal thermal energy of water in vacuum tube solar heaters,” Rev. Colomb. Tecnol. Av. (RCTA), vol. 1, no. 37, pp. 59–65, Jan.–Jun. 2021, doi: 10.24054/rcta.v1i37.980.

[26] M. Abdel-Salam, M. T. EL-Mohandes, and M. Goda, On the improvements of perturb-and-observe-based MPPT in PV systems. 2020. doi: 10.1007/978-3-030-05578-3_6.

[27] J. D. Bastidas Rodríguez, C. A. Ramos Paja, y A. J. Saavedra Montes, «Arreglos fotovoltaicos con estructura cruzada con configuración irregular: un modelo», RCTA, vol. 1, n.º 43, pp. 73–77, mar. 2024, doi: 10.24054/rcta.v1i43.2821.

[28] S. R. Chowdhury and H. Saha, “Solar Energy Materials & Solar Cells Maximum power point tracking of partially shaded solar photovoltaic arrays,” Sol. Energy Mater. Sol. Cells, vol. 94, no. 9, pp. 1441–1447, 2010, doi: 10.1016/j.solmat.2010.04.011.

[29] W. H. Tan and J. Mohamad-Saleh, “Critical Review on Interrelationship of Electro-Devices in PV Solar Systems with Their Evolution and Future Prospects for MPPT Applications,” Energies, vol. 16, no. 2, 2023, doi: 10.3390/en16020850.

[30] O. E. Gualdrón Guerrero, R. I. Laguado Ramírez y E. G. Flórez Serrano, “Dimensionamiento óptimo de un sistema híbrido de energía solar-eólica y banco de baterías utilizando inteligencia artificial,” Rev. Colomb. Tecnol. Av. (RCTA), vol. 2, no. 40, pp. 152–159, Sep. 2022, doi: 10.24054/rcta.v2i40.2363.

[31] S. Motahhir, A. El Hammoumi, and A. El Ghzizal, “The most used MPPT algorithms: Review and the suitable low-cost embedded board for each algorithm,” J. Clean. Prod., vol. 246, no. xxxx, p. 118983, 2020, doi: 10.1016/j.jclepro.2019.118983.

[32] H. P. Nguyen, T. T. Nguyen, M. P. Le, and T. N. Tran, “Experimental platforms consisting of software-in-the-loop, hardware-in-the-loop and power-hardware-in-the-loop for developing MPPT charge controller for photovoltaic system,” Sol. Energy, vol. 298, no. May, p. 113666, 2025, doi: 10.1016/j.solener.2025.113666.

Descargas

Publicado

01-09-2025

Cómo citar

[1]

J. E. Lizarazo-Parada, A. . Pardo-García, and J. L. Diaz-Rodríguez, “Caracterización de arreglo fotovoltaico para MPPT y convertidor boost”, AiBi Revista de Investigación, Administración e Ingeniería, vol. 13, no. 3, pp. 1–12, Sep. 2025, doi: 10.15649/2346030X.6274.